2008 Rank School Name Country
Source: QS Quacquarelli Symonds (www.topuniversities.com)
1 HARVARD University
United States
2 YALE University
United States
3 University of CAMBRIDGE
United Kingdom
4 University of OXFORD
United Kingdom
5 CALIFORNIA Institute of Technology
United States
6 IMPERIAL College London
United Kingdom
7 UCL (University College London)
United Kingdom
8 University of CHICAGO
United States
9 MASSACHUSETTS Institute of Technology
United States
10 COLUMBIA University
United States
11 University of PENNSYLVANIA
United States
12 PRINCETON University
United States
13 DUKE University
United States
14 JOHNS HOPKINS University
United States
15 CORNELL University
United States
16 AUSTRALIAN National University
United States
17 STANFORD University
United States
18 University of MICHIGAN
United States
19 University of TOKYO
Japan
20 MCGILL University
Canada
21 CARNEGIE MELLON University
United States
22 KING'S College London
United Kingdom
23 University of EDINBURGH
United Kingdom
24 ETH Zurich (Swiss Federal Institute of T...
Switzerland
25 KYOTO University
Japan
26 University of HONG KONG
Hong Kong
27 BROWN University
United States
28 École Normale Supérieure, PARIS
France
29 University of MANCHESTER
United Kingdom
30 National University of SINGAPORE(NUS)
Singapore
31 University of CALIFORNIA, Los Angeles (U...
United States
32 University of BRISTOL
United Kingdom
33 NORTHWESTERN University
United States
34 ÉCOLE POLYTECHNIQUE
France
35 University of BRITISH COLUMBIA
Canada
36 University of California, BERKELEY
United States
37 The University of SYDNEY
Australia
38 The University of MELBOURNE
Australia
39 HONG KONG University of Science & Techno...
Australia
40 NEW YORK University (NYU)
United States
41 University of TORONTO
Canada
42 The CHINESE University of Hong Kong
Hong Kong
43 University of QUEENSLAND
Australia
44 OSAKA University
Japan
45 University of NEW SOUTH WALES
Australia
46 BOSTON University
United States
47 MONASH University
Australia
48 University of COPENHAGEN
Denmark
49 TRINITY College Dublin
Ireland
50 Ecole Polytechnique Fédérale de LAUSANNE...
Switzerland
51 PEKING University
China
52 SEOUL National University
Korea, South
53 University of AMSTERDAM
Netherlands
54 DARTMOUTH College
United States
55 University of WISCONSIN-Madison
United States
56 TSINGHUA University
China
57 HEIDELBERG Universität
Germany
58 University of CALIFORNIA, San Diego
United States
59 University of WASHINGTON
United States
60 WASHINGTON University in St. Louis
United States
61 TOKYO Institute of Technology
Japan
62 EMORY University
United States
63 UPPSALA University
Sweden
64 LEIDEN University
Netherlands
65 The University of AUCKLAND
New Zealand
66 LONDON School of ECONOMICS and Political...
United Kingdom
67 UTRECHT University
Netherlands
68 University of GENEVA
Switzerland
69 University of WARWICK
United Kingdom
70 University of TEXAS at Austin
United States
71 University of ILLINOIS
United States
72 Katholieke Universiteit LEUVEN
Belgium
73 University of GLASGOW
United Kingdom
74 University of ALBERTA
Canada
75 University of BIRMINGHAM
United Kingdom
76 University of SHEFFIELD
United Kingdom
77 NANYANG Technological University
Singapore
78 DELFT University of Technology
Netherlands
79 RICE University
United States
80 Technische Universität MÜNCHEN
Germany
81 University of AARHUS
Denmark
82 University of YORK
United Kingdom
83 GEORGIA Institute of Technology
United States
84 The University of WESTERN AUSTRALIA
Australia
85 University of ST ANDREWS
United Kingdom
86 University of NOTTINGHAM
United Kingdoms
87 University of MINNESOTA
United States
88 LUND University
Sweden
89 University of CALIFORNIA, Davis
United States
90 CASE WESTERN RESERVE University
United States
91 Université de Montréal
Canada
92 University of HELSINKI
Finland
93 Hebrew University of JERUSALEM
Israel
94 Ludwig-Maximilians-Universität München
Germany
95 KAIST - Korea Advanced Institute of Scie...
Korea, South
96 University of VIRGINIA
United States
97 University of PITTSBURGH
United States
98 Santa Barbara
United States
99 PURDUE University
United States
100 University of SOUTHAMPTON
United Kingdom
WIRELESS LAN
type 2 modem
|
|
WA3002G4 - WIRELESS |
Configuration - WA3002G4 (FLASH - Hands-on)
Before going in for configuration or changing password Assign IP Address to the NIC
Step-1: Open internet explorer, type 192.168.1.1 in the address bar and press Enter.
Step-2: Type Username as admin and Password as admin and Click on OK button.
Step-3: Click on Advanced Setup on the Left hand side
Step-4: In the Wide Area Network (WAN) Setup page, you can see that the protocol is PPPoE against VPI/VCI - 0/35 (first row) and in all other rows, the protocol is Bridge. Click and put a check mark in all the check boxes in the Remove column (except the first row in which VPI/VCI is 0/35 and the protocol is PPPoE) and then Click on Remove button at the bottom of the page. Now all the lines except the first line will be deleted.
Step-5: Now Click on the Edit button in the last column of that row.
Step-6: In the ATM PVC Configuration page, scroll down and simply Click on Next Button.
Step-7: In the Connection Type page, Check whether PPP over Ethernet (PPPoE) Radio Button is selected. Click on Next Button.
Step-8: In the PPP Username and Password page, delete the default username and password (multiplay) and type the Username and Password as given by BSNL and scroll down the page. Click and put a check mark in Retry PPP password on authentication error checkbox. Check whether Bridge PPPoE Frames Between WAN and Local ports (Default Enabled) Check box is ticked. Click on Next Button.
Step-9: In the Network Address Translation Settings page, scroll down and click on Next Button.
Step-10: WAN Setup - Summary page will appear. Scroll down and Click on SAVE Button.
Step-11: On the left hand side, Click on Wireless.
Step-12: Wireless - Basic page will appear. Are you going to use wireless?
If Yes Click Here
If No Click Here
Step-13: Click on Enable Wireless Check box and remove the tick mark. (Disable wireless).
Step-14: Scroll down and click on Save/Apply button.
Step-15: After a few seconds Wireless - Basic page will appear again. Click on Management on the left hand side.
Step-16: Click on Save/Reboot under Management.
Step-17: Click on Save/Reboot button on the right hand side. DSL Router Reboot page will appear and will remain for 2 minutes.
After 2 minutes Device Info page will appear. Close the internet explorer. Wait for the lamps to settle and start browsing. You have successfully configured the WA3002G4 modem for non-wireless working..
Having configured the modem, go to internet protocol (TCP/IP) properties again and take off the IP Address assigned by selecting Obtain IP address automatically radio button.
Step-13: In the SSID Text box type a name with which your wireless network can be identified. (This can be your name or your organisations name)
Step-14: Scroll down and click on Save/Apply button.
Step-15: After a few seconds Wireless - Basic page will appear again. Click on Security on the left hand side.
Step-16: In the Wireless Security page on the right hand side, Click on the Network Authentication drop down list and select WPA-PSK. Now in the WPA Pre-Shared Key text box just below it, type a password (minimum 8 characters). The is going to be the keyword with which you can enter into the wireless network identified by the name given in the SSID field.
Step-17: Click on Save/Apply button.
Step-185: After a few seconds Wireless - Security page will appear again. Click on Management on the left hand side.
Step-16: Click on Save/Reboot under Management.
Step-17: Click on Save/Reboot button on the right hand side. DSL Router Reboot page will appear and will remain for 2 minutes.
After 2 minutes Device Info page will appear. Close the internet explorer. Wait for the lamps to settle and start browsing. You have successfully configured the WA3002G4 modem for Wireless working..
Having configured the modem, go to internet protocol (TCP/IP) properties again and take off the IP Address assigned by selecting Obtain IP address automatically radio button.
Changing the Password - WA3002G4 (FLASH - Hands-on)
Before going in for configuration or changing password Assign IP Address to the NIC
Step-1: Open internet explorer, type 192.168.1.1 in the address bar and press Enter.
Step-2: Type Username as admin and Password as admin and Click on OK button.
Step-3: Click on Advanced Setup on the Left hand side
Step-4: On the Right hand side, in the WAN Setup page, Click on the Edit button in the last column of the first row. (VPI/VCI 0/35 & Protocol - PPPoE)
Step-5: In the ATM PVC Configuration page, simply Click on Next Button.
Step-6: In the Connection Type page, Click on Next Button.
Step-7: In the PPP Username and Password page, delete the old password and type the New Password (the one you have changed in www.dataone.in site) and scroll down the page. Click on Next Button.
Step-8: In the Network Address Translation Settings page, scroll down and click on Next Button.
Step-9: WAN Setup - Summary page will appear. Click on SAVE Button
Step-10: Click on Management on the left hand side.
Step-16: Click on Save/Reboot under Management.
Step-17: Click on Save/Reboot button on the right hand side. DSL Router Reboot page will appear and will remain for 2 minutes.
After 2 minutes Device Info page will appear. Close the internet explorer. Wait for the lamps to settle and start browsing. You have successfully changed the password in the WA3002G4 modem.
Having changed the password in the modem, go to internet protocol (TCP/IP) properties again and take off the IP Address assigned by selecting Obtain IP address automatically radio button.
Dialer Configuration - WA 3002G4 (Flash Hands-on)
Step-1: Open internet explorer, type 192.168.1.1 in the address bar and press Enter.
Step-2: Type Username as admin and Password as admin and Click on OK button.
Step-3: Click on Advanced Setup on the Left hand side
Step-4: In the Wide Area Network (WAN) Setup page, you can see that the protocol is PPPoE against VPI/VCI - 0/35 (first row) and in all other rows, the protocol is Bridge. Click and put a check mark in all the check boxes in the Remove column (except the first row in which VPI/VCI is 0/35 and the protocol is PPPoE) and then Click on Remove button at the bottom of the page. Now all the lines except the first line will be deleted.
Step-5: Now Click on the Edit button in the last column of that row.
Step-6: In the ATM PVC Configuration page, scroll down and simply Click on Next Button.
Step-7: In the Connection Type page, Click and select Bridging Radio Button and then Click on Next Button.
Step-8: In the next screen (uncheck the check box below to disable this WAN service) simply click on Next button.
Step-9: WAN Setup - Summary page will appear. Click on SAVE Button
Step-10: Now the WAN Setup page will appear. Click on Management on the left hand side.
Step-11: Click on Save/Reboot under Management.
Step-12: Click on Save/Reboot button on the right hand side. DSL Router Reboot page will appear and will remain for 2 minutes.
After 2 minutes Device Info page will appear. Close the internet explorer. Wait for the lamps to settle and start browsing. Now the modem can be used in Bridge mode.
Having configured the modem for dialer working, go to
internet protocol (TCP/IP) properties again and take off the IP Address assigned by selecting Obtain IP address automatically radio button.
How to Restore modem to thefactory default settings? (Flash Hands-on)
Step-1: Open internet explorer, type 192.168.1.1 in the address bar and press Enter.
Step-2: Type Username as admin and Password as admin and Click on OK button.
Step-3: In the Device Info page, Click on Management on the Left hand side.
Step-4: Click on Restore Default under it.
Step-5: Now on the Right hand side, Click on Restore Default Settings Button.
Step-6: Are you sure you want to restore factory default settings? message box will appear. Click on OK Button.
DSL Router Restore screen will appear and will remain for 2 minutes. Now the modem will reboot and will be restored to factory default settings.
Lamp Indication:
Power : Power LED will glow as soon as you switch on the modem.
DSL: DSL LED will blink first and then settle permanently in yellow, if the connectivity between the modem and the exchange broadband equipment is perfect and extablished.
Internet: Internet LED will glow when you are connected to the internet.
WLAN: WLAN LED will glow if wireless is enabled in your modem.
If the connectivity between your modem and computer is OK, two LEDs on either side of the LAN socket will glow in the back panel of your modem.
Splitter Connectivity
If the connections are interchanged in the splitter, the link will blink and will not become stable. (The wire coming from the exchange should be connected directly to the Line jack of the splitter. Modem should be connected to the Modem or ADSL jack of the splitter and Phone should be connected to the Phone jack of the splitter)
Please check whether you are using alengthy PVC wire from the modem to the splitter. (The wire from the modem to the splitter should not be more than 1-1/2 meters).
PLEASE NOTE: No telephone extension cabling is to beused to connect the modem to the splitter, as this was not designed to carry a broadband signal.
Ifthe connections are firm and perfect, and still unable to get link, please call Toll Free number 1800 424 1600, book a complaint and wait for technical assistance.